#include <ESP8266WiFi.h>

const char* ssid = "yourWiFiSSID";
const char* password = "yourpassword";

const char* host = "192.168.2.1";


const char *connect = ";CONNECT";
const char *disconnect = ";DISCONNECT";

// for Wemos D1
#if 0
  #define OUTPUT_PIN (2)
  #define OUT_ON LOW
  #define OUT_OFF HIGH
#else
 // for OBI Socket 2
  #define OUTPUT_PIN (4)
  #define OUT_ON HIGH
  #define OUT_OFF LOW
#endif


void setup()
{

pinMode(OUTPUT_PIN, OUTPUT);     // Initialize GPIO pin as an output

  Serial.begin(115200);
  Serial.println();

  Serial.printf("Connecting to %s ", ssid);
  WiFi.begin(ssid, password);
  while (WiFi.status() != WL_CONNECTED)
  {
    delay(500);
    Serial.print(".");
  }
  Serial.println(" connected");
  digitalWrite(OUTPUT_PIN, OUT_ON);   // Turn the LED on 
  delay(500);            // Wait for 500 ms
  digitalWrite(OUTPUT_PIN, OUT_OFF);   // Turn the LED off 


}


void loop()
{
  WiFiClient client;

  Serial.printf("\n[Connecting to %s ... ", host);
  if (client.connect(host, 1012))
  {
    Serial.println("connected]");

/*    
    Serial.println("[Sending a request]");
    client.print(String("GET /") + " HTTP/1.1\r\n" +
                 "Host: " + host + "\r\n" +
                 "Connection: close\r\n" +
                 "\r\n"
                );

    Serial.println("[Response:]");
*/
    while (client.connected() || client.available())
    {
      if (client.available())
      {
        String line = client.readStringUntil('\n');
        Serial.println(line);
        if( line.indexOf( connect ) > -1) {
         Serial.println("line busy]");
          digitalWrite(OUTPUT_PIN, OUT_ON);   // Turn the OUTPUT on
        }
        if( line.indexOf( disconnect ) > -1) {
         Serial.println("line free]");
          digitalWrite(OUTPUT_PIN, OUT_OFF);   // Turn the OUTPUT off
        }
      }
    }
    client.stop();
    Serial.println("\n[Disconnected]");
  }
  else
  {
    Serial.println("connection failed!]");
    client.stop();
  }
  delay(5000);
}